Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2 LOGIQ
TM
3 SERVICE MANUAL
4-8 Section 4-3 - General Procedure
4-3-3-2 Archiving Presets to an CD(R/W)/MO Disk
1.) Insert an empty (blank) formatted CD(R/W)/MO disk into the device drive.
2.) Press the UTILITY Key in the Keyboard and Select System> BACKUP. The Backup Screen will
be shown on the monitor.
3.) Select the item to back up either from Resource Files.
4.) Enter backup destination or browse through the disk to locate the destination.
5.) Click on BACKUP the backup status for each item is displayed on the Result column.
6.) Make sure “Finished OK” is displayed on the Result column.
Figure 4-6 Backup Sheet