Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2LOGIQ
TM
3 SERVICE MANUAL
Chapter 4 4-1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ™ 3 scanner
diagnostics by using the built-in service software, and power supply adjustments.
4-1-2 Chapter Contents
Section 4-2
Required Equipment
• An empty (blank) CD R/W disk
• At least one transducer. (normally all the transducers used on the system should be checked).
Table 4-1 Contents in Chapter 4
Section Description Page Number
4-1
Overview
4-1
4-2
Required Equipment
4-1
4-3
General Procedure
4-2
4-4
Functional Checks
4-11
4-5
Software Configuration Checks
4-27
4-6
Peripheral Checks
4-28
4-7
Safety Issues
4-29
4-8
Site Log
4-30
NOTICE
Most of the information pertaining to this Functional Checks chapter is found in the LOGIQ™ 3
Basic User Manual (Direction number 2300750-100).
Look for the letters (BUM) after a section in the Table of Contents to determine if the information
is in this chapter or in the Basic User Manual.