Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2LOGIQ
TM
3 SERVICE MANUAL
Chapter 3 3-41
Section 3-11
Loading Application Software
3-11-1 Loading Applications Software
1.) Place the “Application Software” CDROM into the CDROM drive.
2.) Press the Start button on the tool bar at the bottom of the Screen and select “Run…”.
Enter “g:\LoadSoftware.bat” into the dialog box as shown in Figure 3-24.
3.) You will see a screen that warns you that you are about to load software, press the Enter key
or select OK to start the process.
4.) You will see a Command (CMD) window open as shown in Figure 3-25 on page 42 .
Figure 3-24 Run Load Software