Specifications
sales@cop-eu.com
01457 874 999 01457 829 201
www.cop-eu.com
sales@cop-eu.com
01457 874 999 01457 829 201
www.cop-eu.com
Fixed Towers
Tilt Over Towers
Audio Pick Up
External Detection
WT-FMT4
WT-ET06
WT-ST6
WT-WD6
15-BA07
PA-15WE
WT-FTM6
WT-TOP6
WT-3WP150
15-BA08
PA-30NE
4 Metre Fixed Column
Flange Mount & Root Base
6 Metre Square Section
Column
Flange Mount & Root Base
6 Metre Fixed Lattice
Column
Flange Mount & Root Base
6 Metre Lattice Tower
Flange Mount & Root Base
Audio Pick Up Box
15 Metre Wide Angle
PIR Sensor
6 Metre Fixed Column
Flange Mount & Root Base
6 Metre Column
Flange Mount & Root Base
3 Metre Fixed Column
Wall Mount
In Line Audio Pick Up
Box
30 Metre Long Range
PIR Sensor
• Tubular construction • Fixed tower • Tube diameter 139mm • Cable access hole diameter 127mm
• Base plate size 450 x 450mm • Door aperture 360 x 90mm • Max equipment capacity 25Kg
• Compatible with all COP speed dome brackets • Manufactured by WEC and delivered direct to site
• Delivery charge is not included and will be quoted separately • Total weight 75Kg
• Square construction • Tilt over tower • Requires winch • Tilting real clearance 1150mm • Column size
100mm x 100mm • Cable access hole diameter 108mm • Base plate size 450 x 450mm • Door aperture
325 x 105mm • Max equipment capacity 25Kg • Compatible with all COP speed dome brackets
• Manufactured by WEC and delivered direct to site • Delivery charge is not included and will be
quoted separately • Total weight 140Kg
• Lattice construction • Fixed tower • Max equipment capacity 25Kg • Compatible with all COP speed
dome brackets • Manufactured by WEC and delivered direct to site • Delivery charge is not included
and will be quoted separately
• Lattice construction • Tilt over tower • Max equipment capacity 25Kg • Compatible with all COP
speed dome brackets • Manufactured by WEC and delivered direct to site • Delivery charge is not
included and will be quoted separately
• 1x Phono audio out • 1x DC jack • High sensitivity microphone • Preamplier • Usable range of
up to 10 metres • Power input: 12v DC @ 10mA supply
• High quality external PIR sensor • Wide angle • 64 degree coverage • Range 15 metres
• Voltage free relay output up to 30vAC @ 500mA • IP65 rated external housing • Fixing bracket
with cable management • Power input: 10-30v DC @ 25mA
• Tubular construction • Fixed tower • Tube diameter 139mm • Cable access hole diameter 127mm
• Base plate size 450 x 450mm • Door aperture 360 x 90mm • Max equipment capacity 25Kg
• Compatible with all COP speed dome brackets • Manufactured by WEC and delivered direct to site
• Delivery charge is notincluded and will be quoted separately • Total weight 140Kg
• Tubular construction • Tilt over tower • Requires winch • Tilting real clearance 1150mm • Column size
Ø114mm • Cable access hole diameter 108mm • Base plate size 450 x 450mm • Door aperture 360 x
90mm • Max equipment capacity 25Kg • Compatible with all COP speed dome brackets
• Manufactured by WEC and delivered direct to site • Delivery charge is not included and will be
quoted separately • Total weight 140Kg
• Square construction • Fixed tower • Stand off bracket 150mm • Max equipment capacity 25Kg
• Compatible with all COP speed dome brackets • Manufactured by WEC and delivered direct to site
• Delivery charge is not included and will be quoted separately
• 1x Phono video pass through • 1x Phono audio out • 1x DC jack power pass through • High
sensitivity microphone • Preamplier • Usable range of up to 10 metres • Power input: 12v DC
@ 10mA supply
• High quality external PIR sensor • Long range • 10 degree coverage • Range 30 metres
• Voltage free relay output up to 30vAC @ 500mA • IP65 rated external housing • Fixing
bracket with cable • Power input: 10-30v DC @ 25mA
Covert Cameras
Dummy Cameras
15-CH20NC
15-CD20H
15-CH24C
15-CDM03
Colour PIR Covert
Camera
3.6mm Lens - 420 TVL
Mini Dummy Dome
Camera
Colour Smoke Detector
Camera
3.7mm Lens - 420 TVL
Dummy Camera
With Lens & Bracket
• 420 TVL 1/4" Sony CCD • True colour • 3.6mm xed iris lens • 2.0 Lux • PIR detector housing
• Fixing bracket with 45 degree adjustment • C/W 250mm cable with BNC & DC jack connectors
• Power input: 12v DC 100mA • Requires Regulated power supply • Size 52 x 107 x 37mm
• Plastic internal dummy housing • Colour: White • Size: Ø 113 x 80mm
• 420 TVL 1/4" Sony CCD • True colour • 3.7mm pin hole lens • 1.0 Lux • Smoke detector housing
• Side ways view camera tment • C/W 250mm cable with BNC & DC jack connectors • Power input
12v DC 100mA • Size Ø125 x 53mm
• Metal internal camera body case • Dummy lens • Standard xing bracket • Size: 50 x 50 x 100mm
Surge Protection
Tower Ancillaries
15-SP01A
WT-ACB1
15-SP05VPD
WT-ACB3
PR142
WT-TSA
PR140
WUB
WUA
15-SP04D
WT-ACB2
15-GL01K
WT-PTZ-S
15-GL01H
WT-RD1
RG59 Video Surge
Protection
Anti Climb Spike
For Lattice Towers
RG59 & CAT-5 Video &
Data Surge Protection
Anti Climb Spike
For Square Towers
Inline Mains Filter
Dual Fixed Housing
Adaptor
Humdinger High
Performance Ground
Loop Isolation Transformer
Winch
For Tilt Over Towers
Heavy Duty Winch
For Tilt Over Towers
CAT-5 Data Surge
Protection Terminal
Anti Climb Spike
For Tubular Towers
High Frequency
Interference Blocker Kit
Single Fixed Housing
Adaptor
Inline Ground Loop
Isolation Transformer
Pre Root Delivery
• Passive lter • Protects a CCTV system from high voltage surges • BNC in / out • For use with RG59
cable • Invisible to CCTV video signals • No power supply is required • Size: 25 x 25 x 74mm
• Fits all lattice towers • Manufactured by WEC and delivered direct to site • Delivery charge is
not included and will be quoted separately
• Passive lter • Protects a CCTV system from high voltage surges • BNC video in / out • Terminal
data in/out • For use with RG59 cable and CAT-5 cable • Invisible to CCTV video signals • No
power supply is required • Size: 45 x 32 x 72mm
• Fits all square towers • Manufactured by WEC and delivered direct to site • Delivery charge is
not included and will be quoted separately
• In line mains lter • Filters high voltage spikes • Supplied with a standard 13A mains plug at
one end • Standard IEC320 kettle lead at the other end • Ideal for use with DVRs and other
sensitive equipment
• Fits all towers • Allows two standard external camera housings to be tted • Top of tower
mounting • Delivery charge is not included and will be quoted separately
• Wideband video-isolating transformer • Reduces longitudinal mains induced hum • Suitable
for high resolution video signals • Suitable for ‘down the cable’ telemetry • Has a bandwidth
superior to most of its similarly priced competitors • Negligible insertion loss • BNC in / out
• No power supply required
• A winch handle for use with tilt over towers up to 6 metres • Delivery charge is not included
and will be quoted separately
• A winch handle for use with all tilt over towers • Delivery charge is not included and will be
quoted separately
• Passive lter • Protects a CCTV system from high voltage surges • Terminal in / out
• For use with CAT-5 cable • Invisible to CCTV video signals • No power supply is required
• Size: 25 x 25 x 74mm
• Fits all tubular towers • Manufactured by WEC and delivered direct to site• Delivery charge is
not included and will be quoted separately
• Containing a transmitter and receiver • Block the interference from electromagnetic waves
• High voltage electricity • Wireless transmissions • Video transformer lter function • 2x BNC
connectors • Transmitter requires 12v DC 100mA PSU (included) • Receiver requires no power
supply
• Fits all towers • Allows a standard external camera housing to be tted • Top of tower
mounting • Delivery charge is not included and will be quoted separately
• BNC male to BNC female • 150mm cable on both sides • No power required • Prevents video-
signal distortion caused by video ground loops • Eliminates picture tearing • Eliminates cross
talk and rolling • Prevents power cables laid by others interfering with the CCTV system
• Delivery of root bracket before delivery of tower allowing the root bracket to be tted to the
ground prior to the delivery of the tower
45º
45º
38 Ancillaries Towers 39