Technical Data Bulletin

Copper Sealtite 2000 07 65 13 - 3
A. Warranty Period: Lifetime.
PART 2 PRODUCTS
2.1 MANUFACTURER
A. Advanced Building Products, Inc., PO Box 98, Springvale, Maine 04083. Toll Free 800-252-
2306. Phone [phone]. Fax [phone]. Website www.advancedflashing.com. E-mail
[e-mail].
2.2 LAMINATED SHEET FLASHING
A. Non-asphaltic, Thru-Wall, Laminated, Copper Fabric Flashing: “Copper Sealtite 2000”.
1. Description: Full, single copper sheet laminated with adhesive between 2 layers of
fiberglass fabric.
Specifier Notes: Specify the weight of the copper sheet.
a. Copper Sheet: [2] [3] [5] oz per sq ft, ASTM B 370.
b. Adhesive: Non-asphaltic.
2. Use: Above-grade masonry flashing for cavity walls.
3. UV resistant.
4. Flexible.
2.3 ACCESSORIES
A. Sealant: “Sealtite Sealant” for non-asphaltic flashing.
B. Mortar Deflection Device: “Mortar Break” or “Mortar Break II”.
PART 3 EXECUTION
3.1 EXAMINATION
A. Examine areas to receive flashing.
B. Notify Architect of conditions that would adversely affect installation or subsequent use.
C. Do not begin surface preparation or installation until unacceptable conditions are corrected.
3.2 SURFACE PREPARATION
A. Prepare surfaces to receive flashing in accordance with manufacturer’s instructions.
B. Ensure surfaces to receive flashing are free from loose materials and are reasonably smooth.