Technical Data Bulletin

Copper Sealtite 2000 07 65 13 - 2
A. Section 04 05 23 – Masonry Accessories.
B. Section 04 2__ ___ – __________ Masonry: Masonry installation.
C. Section 07 60 00 – Flashing and Sheet Metal.
1.3 REFERENCE STANDARDS
Specifier Notes: List reference standards mentioned in this section, complete with designations and
titles. Delete reference standards not included in this edited section. This article does not require
compliance with reference standards, but is merely a listing of those used.
A. ASTM B 370 – Standard Specification for Copper Sheet and Strip for Building Construction.
1.4 SUBMITTALS
Specifier Notes: Edit submittal requirements as required. Delete submittals not required.
A. Comply with Section 01 33 00 – Submittal Procedures.
B. Product Data: Submit manufacturer’s product data, including preparation and installation
instructions.
C. Samples: Submit manufacturer’s sample of flashing, minimum 6 inches by 6 inches.
D. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with
specified requirements and are suitable for intended application.
E. Warranty Documentation: Submit manufacturer’s standard warranty.
1.5 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: Manufacturer regularly engaged, for past 10 years, in
manufacture of non-asphaltic thru-wall flashing of similar type to that specified.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original,
unopened containers and packaging, with labels clearly identifying product name and
manufacturer.
B. Storage and Handling Requirements:
1. Store and handle materials in accordance with manufacturer’s instructions.
2. Keep materials in manufacturer’s original, unopened containers and packaging until
installation.
3. Store materials in clean, dry area indoors.
4. Protect materials during storage, handling, and installation to prevent damage.
1.7 WARRANTY