Technical Data Bulletin

ManualsBrandsCop-R-Shield PC ManualsBuilding materials10 in. x 20 ft. Copper Flashing 12 Rolls

Copper Sealtite 2000 07 65 13 - 1

Advanced Building Products, Inc. July 2010

PO Box 98

Springvale, Maine 04083

Toll Free 800-252-2306

Phone 207-490-2306

Fax 207-490-2998

Website www.advancedflashing.com

E-mail info@advancedflashing.com

Product Guide Specification

Specifier Notes: This product guide specification is written according to the Construction Specifications

Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described

in The Project Resource Manual—CSI Manual of Practice, Fifth Edition.

This section must be carefully reviewed and edited by the Architect to meet the requirements of the

project and local building code. Coordinate this section with other specification sections and the

Drawings. Delete all “Specifier Notes” after editing this section.

Section numbers and titles are from MasterFormat 2010 Update.

SECTION 07 65 13

LAMINATED SHEET FLASHING

Specifier Notes: This section covers Advanced Building Products, Inc. “Copper Sealtite 2000

” non-

asphaltic, thru-wall, laminated, copper fabric flashing. Use of “Copper Sealtite 2000” may contribute

toward LEED credits.

Consult Advanced Building Products, Inc. for assistance in editing this section for the specific

application.

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Non-asphaltic, thru-wall, laminated, copper fabric flashing.

1.2 RELATED REQUIREMENTS

Specifier Notes: Edit the following list of related sections as required. Delete related sections not

required. List other sections with work directly related to this section.

Summary of content (5 pages)

PAGE 1
Advanced Building Products, Inc. PO Box 98 Springvale, Maine 04083 Toll Free 800-252-2306 Phone 207-490-2306 Fax 207-490-2998 Website www.advancedflashing.com E-mail info@advancedflashing.com July 2010 Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource Manual—CSI Manual of Practice, Fifth Edition.
PAGE 2
A. Section 04 05 23 – Masonry Accessories. B. Section 04 2__ ___ – __________ Masonry: Masonry installation. C. Section 07 60 00 – Flashing and Sheet Metal. 1.3 REFERENCE STANDARDS Specifier Notes: List reference standards mentioned in this section, complete with designations and titles. Delete reference standards not included in this edited section. This article does not require compliance with reference standards, but is merely a listing of those used. A. 1.
PAGE 3
A. Warranty Period: Lifetime. PART 2 2.1 A. 2.2 A. PRODUCTS MANUFACTURER Advanced Building Products, Inc., PO Box 98, Springvale, Maine 04083. Toll Free 800-2522306. Phone 207-490-2306. Fax 207-490-2998. Website www.advancedflashing.com. E-mail info@advancedflashing.com. LAMINATED SHEET FLASHING Non-asphaltic, Thru-Wall, Laminated, Copper Fabric Flashing: “Copper Sealtite 2000”. 1. Description: Full, single copper sheet laminated with adhesive between 2 layers of fiberglass fabric.
PAGE 4
C. 3.3 A. Ensure there are no slopes to form pockets or prevent free drainage of water to exterior surfaces of wall. INSTALLATION Install flashing in accordance with manufacturer’s instructions at locations indicated on the Drawings. Specifier Notes: Edit the following sentence. Include the section number for the masonry installation. B. Masonry: Install masonry as specified in Section 04 2__ ___. C. Horizontal Masonry Surfaces: 1.
PAGE 5
J. Other Areas: Install flashing at other locations in accordance with manufacturer’s instructions. K. Joining of Material: 1. Make joint by lapping a minimum of 4 inches and coating contact surfaces with sealant. 2. Install flashing with minimum number of lap joints. L. Weep Holes: 1. Install flashing through masonry with proper drainage to outside. 2. Provide weep holes in head joint, with first course immediately above flashing. 3. Keep weep holes free of mortar droppings. M.