User`s guide

37
Enter the time in 24-hour format, (e.g.
2100 for 9:00pm), then press [.
Continue from step 7.
1 Operates On :-
> ..............
6. You will see a screen similar to the one
shown opposite if you have chosen to
edit the days of operation. The number
in the top-left corner indicates whether it
is associated with the first, second or
third pair of on/off times.
Press 1 to 7 to toggle days on/off,
then press [.
Auto Set 1
Ward > **
7. Press r, use the numeric keys to select
the wards to assign to the auto-set
timer, then press [. Any ward numbers
shown are assigned. (A “*” indicates
that the ward will not be assigned, and
“.” Indicates that you have no access to
the ward.)
Continue from step 4 or press ] to exit.
Option 2-0-3:
Setting Up Code-Locks
Timers
This option enables you to define up to
three code-lock timers, each of which is
associated with up to ten users. The timer
prevents the system from accepting the
users' user codes at specified times.
You can define each code lock to have up
to three pairs of switch on (codes not
accepted) and off (codes accepted) times.
You can also choose the days of the week
that each of these operate.