User`s guide

27
Option 2-6: Using Communications
Option 2-6-1:
Starting a Call Back
You can use this option to initiate a
connection over the telephone line to a
remote site that is running the Downloader
software
1
. Once the communication link is
established, the remote site can upload
data and change settings in the control
panel. The link continues until the remote
site disconnects it.

Select this option only if requested by
your alarm company.

Your alarm company may be able to
initiate the link, depending on the
Access Mode (Engineer option 2-5-1-3).
User 2 Menu 6
Communications
1. Press [ to select this option.
Communication 1
Start Call Back
2. Press [ to select Start Call Back
Start Call BackStart Call Back
Start Call Back.
Start CallBack 1
08700543678
3. Use | or ¬, or press a hot key (1 to
4) to select the number to call (as
defined in User option 2-6-2), then press
[ to begin the call.
Calling On : 1
Hit ESC to abort
4. If the connection is established
successfully, the system automatically
returns to its original state. If the
connection is not established
successfully, press ] to abandon the
call.
1
Not available on M750 and M550 systems