User`s guide

22
Option 2-4-1:
Configuring the User
Codes
This option enables you to set up or modify
users. For each user, you specify
information such as the user type and the
wards the user has access to.
User 2 Menu 4
Edit Codes
1. Press [ to select this option.
User Codes 1
Code
2. Press [ to select Code
CodeCode
Code.
Define new users
User no. 05
3. The lowest available user number is
displayed. You can press [ to select
this user. Alternatively, you can select a
different user by entering a number or
by using | or ¬.

Pressing r shows the number of
users currently set up. Press any key
to return to the previous display.
Prox Tag or Code
----
4. Enter a four-digit user code, then press
[, or present the proximity tag to be
given to the user.
Pressing [ without entering a code
maintains the previously-chosen code.

If you see “NOT ACCEPTED try a
different code”, this usually means
that the code is already in use.
Press r and try again with a
different code.
User 05 is type
Not in use
5. Use | or ¬ or press a hot key (0 to 9)
to select the user type (page 19), then
press [.