User`s guide

Checklist for Simulation Setup 3
-5
To
g
et online information about an error or
warnin
g
shown in the Messa
g
e Viewer
1
Select the error or warning message.
2
Press 1.
The following tables list the most commonly encountered
problems and where to find out more about what to do.
Thin
g
s to check in
y
our schematic
Make sure that... To find out more, see this...
✔
The model libraries, stimulus files, and include
files are configured.
Configuring Model Libraries on page 4-41
✔
You are using symbols with models.
Unmodeled Parts on page 3-28
and
Defining
Symbol Attributes Needed for Simulation on
page 5-18
✔
You are not using unmodeled pins.
Unmodeled Pins on page 3-31
✔
You have defined the grounds.
Missing Ground on page 3-32
✔
Every analog net has a DC path to ground.
Missing DC Path to Ground on page 3-33
✔
The symbol template is correct.
Defining Symbol Attributes Needed for
Simulation on page 5-18
✔
Hierarchical parts, if used, are properly
defined.
In your
MicroSim Schematics User’s Guide
, the
Creating and Editing Hierarchical Designs
chapter
✔
Ports that connect to the same net have the
same name.
In your
MicroSim Schematics User’s Guide
, the
Using Ports
section in the
Creating and Editing
Designs
chapter