User`s guide

Transient Analysis 2
-17
6
From the Edit menu, select Paste.
7
Place the ground symbol under the VSTIM symbol as
shown in Figure 2-13.
8
From the View menu, select Fit.
9
From the File menu, select Save As, and then type
clippert.sch as the name of the schematic file you want
to save.
10
Double-click the VSTIM symbol.
11
In the Set Attribute Value dialog box, type
SINE, then click
OK. The New Stimulus dialog box and the Stimulus Editor
appear.
12
In the Stimulus Editor, click SIN, then click OK.
13
In the SIN Attributes dialog box, set the first three
parameters as follows:
Offset Voltage = 0
Amplitude = 10
Frequency = 1kHz
14
Click Apply to view the waveform. The Stimulus Editor
window redisplays and looks like Figure 2-14.
Fi
g
ure 2-14
Stimulus Editor Window
or press C+v