User`s guide

DC Sweep Analysis 2
-15
Figure 2-12 shows the Probe window when both cursors are
placed.
Fi
g
ure 2-12
Voltage Difference at V(In) = 4 Volts
To delete all of the traces
1
From the Trace menu, select Delete All.
At this point, the schematic has been saved. If needed, you can
quit Schematics and Probe and complete the remaining analysis
exercises later using the saved schematic.
Findin
g
Out More about DC
Sweep Anal
y
sis
To find out more about
this...
See this...
DC sweep analysis
DC Sweep on page 9-2
There are also ways to display
the difference between two
volta
g
es as a trace:
• In Probe, add the trace
expression V(In)-V(Mid).
• In Schematics, from the
Markers menu, select Mark
Volta
g
e Differential and place
the two markers on different
pins or wires.
You can also delete an individual
trace by selectin
g
its name in the
trace le
g
end and then pressin
g
X.
Example: To delete the V(In)
trace, click the text,
V(In),
located under the plot’s x-axis,
and then press X.