User`s guide

DC Sweep Analysis 2
-11
2
In the Analysis Setup dialog box, click the DC Sweep
button.
3
Set up the DC Sweep dialog box as shown in Figure 2-6.
Note
The default settin
g
s for the DC Sweep dialo
g
box
are Volta
g
e Source as the swept variable type and
Linear as the sweep type. To choose a different
swept variable type or sweep type, click the
appropriate button.
4
Click OK to close the DC Sweep dialog box.
5
Click Close to exit the Analysis Setup dialog box.
6
From the File menu, select Save.
7
From the Analysis menu, select Simulate to run the analysis
as specified.
Displa
y
in
g
DC Anal
y
sis Results
in Probe
If Probe is set up to automatically open upon successful
completion of a simulation (the default setting), the Probe
window appears when the simulation is finished. The Probe
window includes one or more plot windows like the one shown
in Figure 2-7.
To plot volta
g
es at nets In and Mid
1
If the Probe window is not yet opened, from the Analysis
menu, select Run Probe.
2
From the Trace menu, select Add.
3
Click V(In) and V(Mid) in the Add Traces dialog box.
4
Click OK.
To displa
y
a trace usin
g
a marker
1
In Schematics, from the Markers menu, select Mark
Voltage/Level.
Fi
g
ure 2-6
DC Sweep Dialo
g
or press !
To set up Probe to automatically
open after simulation, from the
Analysis menu, select Probe
Setup and select Automatically
Run Probe After Simulation.
or press I
press C+M