User`s guide

2
-
8 Simulation Examples
To displa
y
bias current throu
g
h V1, R2, and D1
1
In Schematics, make the
clipper.sch window active.
2
On the Simulation toolbar, click the Enable Bias Current
Display button.
3
From the Edit menu, select the Select All command.
4
On the Simulation toolbar, click the Show/Hide Currents on
Selected Part(s) button.
5
Make sure that no schematic components are selected (by
clicking a blank space on the schematic), then shift-click the
V1, R2, and D1 symbols.
6
On the Simulation toolbar, click the Show/Hide Currents on
Selected Part(s) button. The currents into the pins of V1, R2,
and D1 appear.
To turn the displa
y
of bias information off
1
On the Simulation toolbar, click the Enable Bias Voltage
Display button.
2
On the Simulation toolbar, click the Enable Bias Current
Display button.
Voltage and current levels no longer display on the
schematic.
Your settin
g
s for the display of
volta
g
es and currents are stored
with the schematic. For this
reason, if you re-enable the bias
display (described later in this
chapter), all net volta
g
es and the
currents into the pins at V1, R2,
and D1 will display, reflectin
g
the
latest simulation results.