User`s guide

Save and Load Bias Point A
-3
Load Bias Point
Load bias point is a simulation control function that allows you
to set the bias point as an initial condition. A common reason for
giving PSpice A/D initial conditions is to select one out of two
or more stable operating points (set or reset for a flip-flop, for
example).
To use load bias point
1
Run a simulation using Save Bias Point for the Analysis
Setup dialog box.
2
Prior to running another simulation, click Load Bias Point.
3
Specify a bias point file to load. Include the path if the file
is not located in your working directory. Click OK when
finished.
4
Make sure the check box next to Load Bias Point is selected
(
✓).
See Setting Up Analyses on
page 8-3 for a description of the
Analysis Setup dialo
g
box.