User`s guide

19
-
4 Other Output Options
5
If you selected the AC analysis type, enable an output
format:
a
Click the attribute name for one of the following output
formats: MAG (magnitude), PHASE, REAL, IMAG
(imaginary), or DB.
b
In the Value text box, type any non-blank value.
c
Repeat the previous steps (a
) and (b) for as many AC
output formats as you want to see plotted.
6
Repeat steps 2
through 5 for any additional analysis types
you want plotted.
Note
If you do not enable an analysis type, PSpice A/D
reports the transient results.
Generatin
g
Tables of Volta
g
e and
Current Values
You can generate tables of voltage and current values on nets for
any DC sweep, AC sweep, or transient analysis.
To
g
enerate tables of volta
g
e or current to the
output file
1
Place and connect any of the following symbols.
2
Double-click the symbol instance.
3
Click the attribute name for the analysis type that you want
tabulated: DC, AC, or TRAN.
Use this symbol... To tabulate this...
VPRINT1 Voltage on the net that the symbol
terminal is connected to.
VPRINT2 Voltage differential between the two
nets that the symbol terminals are
connected to.
IPRINT Current through a cut in the net. (Insert
this symbol in series, like a current
meter.)
If you do not enable a format,
PSpice A/D defaults to MAG.