User`s guide

Writin
g
Additional Results to the PSpice Output File 19
-3
Writin
g
Additional
Results to the
PSpice Output File
Schematics provides special symbols that let you save additional
simulation results to the PSpice output file as either line-printer
plots or tables.
Generatin
g
Plots of Volta
g
e and
Current Values
You can generate voltage and current line-printer plots for any
DC sweep, AC sweep, or transient analysis.
To
g
enerate plots of volta
g
e or current to the
output file
1
Place and connect any of the following symbols.
2
Double-click the symbol instance.
3
Click the attribute name for the analysis type that you want
plotted: DC, AC, or TRAN.
4
In the Value text box, type any non-blank value such as Y,
YES, or 1.
Use this symbol... To plot this...
VPLOT1 Voltage on the net that the symbol
terminal is connected to.
VPLOT2 Voltage differential between the two
nets that the symbol terminals are
connected to.
IPLOT Current through a net. (Insert this
symbol in series, like a current meter.)
To view the PSpice output file
after havin
g
run a simulation:
1
From the Analysis menu,
select Examine Output.