User`s guide

18
-
8 Viewin
g
Results on the Schematic
Note
Schematics remembers the position of volta
g
e
labels, but not current labels. This means if you
close (after havin
g
saved chan
g
es) and then
reopen your schematic, the volta
g
e labels appear
where you last positioned them; however,
Schematics places each current label at its default
location near the correspondin
g
pin.
Verif
y
in
g
Label Associations
Schematics provides visual cues to help you see what piece of
the schematic a voltage or current label describes.
To see which wire se
g
ment a volta
g
e value
belon
g
s to
1
Click the voltage label.
Schematics highlights the wire segment that the voltage
label describes and draws a dotted line from the label to the
wire segment.
To see which pin a current value belon
g
s to
1
Click the current label.
Schematics displays two things:
• an arrow positioned on the corresponding device pin;
the arrow points in the direction of the current
• a dotted line from the current label to the device pin that
it describes