User`s guide

User Interface Features 17
-33
Sizin
g
Di
g
ital Plots
Sizing bars can be used to change the digital plot size instead of
using Digital Size from the Plot menu. The digital trace name
sizing bar is at the left vertical boundary of the digital plot. If an
analog plot area is displayed simultaneously with the digital
plot, there is an additional plot sizing bar at the bottom
horizontal boundary of the digital plot.
To set the di
g
ital plot size usin
g
the mouse
1
Display at least one digital trace and one analog trace in the
plot window for which you want to set the digital size.
2
To change the bottom position of the digital plot window, do
the following:
a
Place the cursor between the analog and digital parts of
the plot.
b
Click the plot separator.
c
Drag the plot separator until you have the digital size
you want.
3
To change the left side of the digital plot window, do the
following:
a
Place the cursor at the left edge of the digital plot
window you want to resize.
b
Click the left edge.
c
Drag the left edge of the digital plot window to adjust
the space available for displaying digital trace names.