User`s guide

Runnin
g
Probe 17
-15
4
Right-click to quit placing markers.
5
If you have not simulated the circuit yet, from the Analysis
menu, select Simulate.
To control the displa
y
of marked results in Probe
1
In Schematics, from the Markers menu, select one of the
following:
Limitin
g
Probe Data File Size
When PSpice A/D runs, it creates a Probe data file. The size of
this file for transient analyses is roughly equal to:
(# transistors)·(# simulation time points)·24 bytes
The size for other analyses is about 2.5 times smaller. For long
runs, especially transient runs, this can generate Probe data files
that are several megabytes in size. Even if this does not cause a
problem with disk space, large Probe data files take longer to
read in and longer to display traces on the screen.
You can limit Probe data file size by:
• placing markers on your schematic before simulation and
having PSpice A/D restrict the saved data to these markers
only
• excluding data for internal subcircuits
• suppressing simulation output
Choose this
option...
To do this...
Show All Display traces for all markers placed on any
page or level of the schematic in Probe.
Show Selected Display traces only for selected markers
(highlight markers of interest and select
Show Selected).
Clear All Remove all markers from the schematic and
all corresponding traces from the Probe
display.