User`s guide

Runnin
g
Probe 17
-11
5
From the Analysis menu, select Simulate to start the
simulation. Probe starts automatically and displays one
window in monitor mode.
6
Do one of the following to select the waveforms to be
monitored:
• In Probe, from the Trace menu, select Add, and enter
one or more trace expressions.
• In Schematics, from the Markers menu, select and place
one or more markers (and marker color, as needed).
To start Probe from Schematics
1
From the Analysis menu, select Run Probe.
To start Probe in Windows 95
1
From the Windows Start menu, select the MicroSim
program folder and then the Probe shortcut.
To start Probe manuall
y
usin
g
the Windows Run
command
1
From the Windows Start menu, select Run.
2
Type the path to the Probe command file and command line
options or a data file (
.dat).
The command for starting Probe using the Windows Run
command is:
probe options* data_file
This option... Means this...
options
one or more command line options for
running Probe with a command file (C
option), log file (L option), and so on,
where options are preceded with / or -
data_file name of the Probe data file
generated by PSpice A/D
or press !
Durin
g
a multi-run simulation (such as
Monte Carlo, parametric, or
temperature), Probe displays only the
data for the current run in the plot
window.
or press I
For more information, see Using
Schematic Markers to Add Traces on
page 17-13.
press @
See the online MicroSim PSpice
A
/D Reference Manual for a
complete list of Probe command
line options.