User`s guide

Analyzin
g
Results 14
-33
Output control options
Several control options in the Analysis Setup Options dialog
box are available for managing the generation of simulation
condition messages. These are described in Table 14-6
.
Severit
y
levels
Messages are assigned one of four severity levels:
• FATAL
• SERIOUS
• WARNING
• INFO (informational)
FATAL conditions cause PSpice A/D to abort. Under all other
severity levels, PSpice A/D continues to run. The severity levels
are used to filter the classes of messages which are displayed
when loading a Probe data file.
Table 14-6
Simulation Message Output Control Options
Option Meaning
NOOUTMSG Suppresses the recording of simulation
condition messages in the simulation output
file.
NOPRBMSG Suppresses the recording of simulation
condition messages in the Probe data file.
DIGERRDEFAULT=<n> Establishes a default limit, n, to the number
of condition messages that may be generated
by any digital device that has a constraint
checker primitive without a local default. If
global or local defaults are unspecified, there
is no limit.
DIGERRLIMIT=<n> Establishes an upper limit, n, for the total
number of condition messages that may be
generated by any digital device. If this limit is
exceeded, PSpice A/D aborts the run. By
default, the total number of messages is 20.
To access the Analysis Setup
Options dialo
g
box in
Schematics, select Setup from
the Analysis menu, and click the
Options button.