User`s guide

Analyzin
g
Results 14
-25
To add a di
g
ital trace expression
1
In the Add Trace dialog box, make sure that the Digital
check box is selected (
✓).
2
Do one of the following:
• In the Simulation Output Variables list, click the signal
you want to display.
• In the Trace Expression text box, create a digital
expression by either typing the expression, or by
selecting digital output variables from the Simulation
Output Variables list and digital operators from the
Digital Operators and Functions list.
3
If you want to label a signal with a name that is different
from the output variable:
a
Click in the Trace Expression text box after the last
character in the signal name.
b
Type
;display_name where display_name is the
name of the label.
This placeholder... Means this...
digital_output_
variable
output variable from the Simulation Output
Variable list (Digital check box selected)
digital_expression
expression using digital output variables
and operators understood by Probe
display_name
(optional)
text string (name) that you want Probe to
use to label the signal on the plot instead of
using the default output variable notation
Example: U2:Y;OUT1
where U2:Y is the output
variable. On the Probe plot, the
si
g
nal is labeled OUT1.