User`s guide

Monte Carlo Analysis 13
-17
Settin
g
up the anal
y
ses
Define and enable a DC analysis that sweeps the pressure value,
and a Monte Carlo analysis that runs the DC sweep with each
change to the resistance multipliers.
To set up the DC sweep
1
From the Analysis menu, select Setup.
2
Click DC Sweep.
3
In the Swept Var. Type frame, select Global Parameter.
4
Type values in the relevant text boxes as follows.
5
Click OK.
To set up the Monte Carlo anal
y
sis
1
In the Analysis Setup dialog box, click Monte Carlo/Worst
Case.
2
In the Analysis frame, do the following:
a
Choose the Monte Carlo option.
b
In the MC Runs text box, type
10.
3
In the Analysis Type frame, do the following:
a
Choose the DC option.
b
In the Output Var text box, type
I(Meter).
4
In the MC Options frame, choose the All option.
5
Click OK.
In this text box... Type this...
Name P
Start Value 0
End Value 5.0
Increment 0.1
or press !