User`s guide

Monte Carlo Analysis 13
-15
names it <old model name>-X, which in this tutorial, is
Rbreak-X. In the model editor, you can change this name to
whatever you want.
4
To change the instance model name from Rbreak-X to
Rmonte1, do the following:
a
In the model editor window, double-click Rbreak-X in
the
.model Rbreak-X RES line.
b
Type
RMonte1.
5
To add a 2% device tolerance and a 10% lot tolerance to the
resistance multiplier, do the following:
a
Change the R=1 line following the .MODEL statement
to:
R=1 DEV=2% LOT=10%
The model editing window should look something like
Figure 13-6.
6
Click OK to accept the changes.
By default, Schematics saves the RMonte1 .MODEL definition
to the
schematic_name.lib library, which is psensor.lib.
Schematics also automatically configures the library for local
use.
Fi
g
ure 13-6
Model Definition for RMonte1
To find out more about addin
g
model libraries to the
confi
g
uration, see Configuring
Model Libraries on page 4-41.