User`s guide

13
-
12 Monte Carlo and Sensitivity/Worst-Case Analyses
4
Click Save Attr to accept the changes.
5
Click Change Display.
6
In the What to Display frame, choose the Value Only option
to make the DC value (
1.35v) visible on the schematic.
7
Click OK to accept the change, then click OK again to exit
the attributes dialog box.
Settin
g
up the parameters
To complete the value specification for R3, define the global
parameters: Pcoeff, P, and Pnom.
To define and initialize Pcoeff, P, and Pnom
1
Place a PARAM symbol on the schematic.
2
Double-click the PARAM symbol.
3
For each parameter:
a
Double-click the NAMEn or VALUEn attribute to
specify the parameter name and corresponding value as
follows.
b
Click Save Attr.
4
Click OK.
For this
attribute...
Type this...
NAME1 Pcoeff
VALUE1 -0.06
NAME2 P
VALUE2 0
NAME3 Pnom
VALUE3 1.0
press J
press J