User`s guide

11
-
10 Transient Analysis
b
Enter
{AMP} for Amplitude. The curly braces are
required. They indicate that the expression needs to be
evaluated at simulation time.
c
Enter
10k for Frequency and click OK.
d
Select Save from the File menu.
7
Within Schematics, place and define the PARAM symbol:
a
Select Get New Part from the Draw menu.
b
Either browse
special.slb for the PARAM symbol or
type in the name.
c
Place the symbol on your schematic and double-click it
to edit the attributes.
d
Set the value of the NAME1 attribute to AMP (no curly
braces).
e
Set the value of the VALUE1 attribute to 1.
8
Set up the parametric sweep and other analyses:
a
Select Setup from the Analysis menu, and click the
Parametric button.
b
Select Global Parameter in the Swept Var. Type frame.
c
Select Linear in the Sweep type frame.
9
Enter
AMP in the Name text box.
10
Specify values for the Start Value, End Value, and
Increment text boxes.
You can now set up your usual Transient, AC, or DC analysis
and run the simulation.
Creatin
g
New Stimulus S
y
mbols
1
Use the symbol editor to edit or create a symbol with the
following attributes: