User`s guide

8
-
12 Settin
g
Up Analyses and Startin
g
Simulation
Startin
g
Simulation Outside of
Schematics
To start PSpice A/D outside of Schematics
1
Double-click on the PSpice A/D icon in the MicroSim
Program Group.
2
Select Open from the File menu.
3
Do one of the following:
• Double-click on the circuit file name in the list box.
• Enter the name of the circuit file to be simulated in the
File Name text box.
Settin
g
Up Batch Simulations
Multiple simulations can be run in batch mode when starting
PSpice A/D directly with circuit file input. You can use batch
mode, for example, to run a number of simulations overnight
without user intervention. There are two ways to do this as
described below.
Multiple simulation setups within one circuit file
Multiple circuit/simulation descriptions can be concatenated
into a single circuit file and simulated once with PSpice A/D.
Each circuit/simulation description in the file must begin with a
title line and end with a .END statement.
The simulator reads all the circuits in the circuit file and then
processes each one in sequence. The Probe data file and
simulation output file contain the outputs from each circuit in
the same order as they appeared in the circuit file. The effect is
the same as if you had run each circuit separately and then
concatenated all of the outputs.