User`s guide

Settin
g
Up Analyses 8
-7
These building blocks can be used for specifying output
variables as shown in Table 8-3
(which summarizes the
accepted output variable formats) and Tables 8-4
through 8-7
(which list valid elements for two-terminal, three or four-
terminal, transmission line devices, and AC specifications).
out device specifies the <fully qualified device name>
Table 8-3
PSpice A/D Output Variable Formats
Format Meaning
V[ac](< + out id >) voltage at out id
V[ac](< +out id >,< - out id >) voltage across + and - out
id’s
V[ac](< 2-terminal device out id >) voltage at a 2-terminal
device out id
V[ac](< 3 or 4-terminal device out id >) or
V<x>[ac](< 3 or 4-terminal out device >)
voltage at non-grounded
terminal x of a 3or4-
terminal device
V<x><y>[ac](< 3 or 4-terminal out device >) voltage across terminals x
and y of a 3 or 4-terminal
device
V[ac](< transmission line out id >) or
V<z>[ac](< transmission line out device >)
voltage at one end z of a
transmission line device
I[ac](< 3 or 4-terminal out device >:<x>) or
I<x>[ac](< 3 or 4-terminal out device >)
current through non-
grounded terminal x of a
3 or 4-terminal out device
I[ac](< transmission line out device >:<z>) or
I<z>[ac](< 3 or 4-terminal out device >)
current through one end z
of a transmission line out
device
< DC sweep variable > voltage or current source
name