User`s guide

4
-
28 Creatin
g
and Editin
g
Models
Addin
g
curves for more than one temperature
By default, the Parts utility computes device curves at 27°C. For
any characteristic, you can add curves to the plot at other
temperatures.
To add curves for Forward Current at a different
temperature
1
Click the Forward Current plot window to bring it to the
foreground.
2
From the Trace menu, select Add.
3
Type
100 (in °C).
4
Click OK.
The Forward Current plot should appear as shown in Figure 4-7.
press
Z
Fi
g
ure 4-7
Forward Current Device Curve at Two