User`s guide

Thin
g
s to Watch For 3
-31
Check for this
• Does the relevant model library, stimulus file, or include file
appear in the configuration list?
• If the file is configured, does the default library search path
include the directory path where the file resides, or
explicitly define the directory path in the configuration list?
If the file is not configured, add it to the list and make sure that
it appears before any other library or file that has an identically-
named definition.
To view the confi
g
uration list
1
In the schematic editor, from the Analysis menu, select
Library and Include Files.
If the directory path is not specified, update the default library
search path or change the file entry in the configuration list to
include the full path specification.
To view the default librar
y
search path
1
In the schematic editor, from the Options menu, select
Editor Configuration.
Unmodeled Pins
If you see messages like these in the Message Viewer,
Warning: Part part_name pin pin_name is
unmodeled.
Warning: Less than 2 connections at node
node_name .
or messages like this in the PSpice output file,
Floating/unmodeled pin fixups
then you may have drawn a wire to an unmodeled pin.
To find out more about how to
confi
g
ure these files and about
search order, see
Configuring
Model Libraries on page 4-41.
To find out more about the
default confi
g
uration, see How
Are Models Organized? on
p
a
g
e4-4.
To find out more about the library
search path, see
Changing the
Library Search Path on
page 4-46.