Installation guide

Page 2 11681330 Issue 1
Introduction
The 9940 and 9941 keypads are designed to work with 9853, 9851, 9752, 9751
and 9651 alarm system control units. These keypads are a direct replacement for
the 9930, and offers the advantage of smaller size and improved appearance.
The 9940 keypad has a proximity tag reader coil fitted inside the case and can
work with the same proximity tags as the 934 proximity reader module. The 9941
has no detector coil fitted.
A B C D
1 2 3
4 5 6
7 8 9 0
Figure 1. 9940 Remote Keypad.
Operator Controls and Displays
The 9940 and 9941 keypads have a two line by 16 character LCD display that
shows “first to alarm” information, level status, and programming commands. In
addition there are three LEDs with the following functions:
 Glows steadily when mains power is present. Flashes when the system is
working from battery backup.
Glows steadily when the system requires the user to acknowledge an
alert.