Specification

Project Name: Prepared By:
Project Number: Date:
Catalog Number: Type:
www.cooperwiringdevices.com
Specifications and availability are subject to change without notice.
125-0055-13
Specification & Performance Data for the Combination USB Charger with
Tamper Resistant Receptacle
Application
The USB Single Receptacle provides quick and convenient access to charge virtually any electronic component including smart
phones, tablets, e-readers, cameras and MP3 players. The combination device provides code compliance with 2011 NEC Article
406.12 that requires Tamper Resistant Receptacles in dwelling units.
Device Type Combination USB TR Receptacle
Wiring Type
Back&sidewire
Testing & Code Compliance
cULusListedtoUL498andUL1310
Specifications:
Environmental
Flammability MeetsUL94requirements;V5rated
Temperature Rating -20ºCto60ºC(-4ºFto140ºF)
Specifications:
Electrical
AC
Output
Dielectric Voltage Receptaclewithstands2000VperUL498
Temperature Rise Receptacle-max.30ºC(86°F)after100cyclesofoverload@150%ofratedcurrent(DC)
DC
Output
Switching Frequency Typical66kHz
Output Voltage Nominal5V(+/-10%)
Protection CurrentLimitingandThermalShutdownProtection
Output Current ConstantCurrentMaximum700mA
Specifications:
Mechanical
Base Device Terminal
Accommodation
#14or#12AWG
Voltage Ratings Permanentlymarkedondevice
Specifications:
Materials
Face PVC
Base PVC
Strap 0.045"thicksteel,zincplated
Auto Ground Clip PhosphorBronze
Line Contacts 0.030"thicktriplewipebrass
Ground Contact
0.030"thickdoublewipebrass
Terminal Screws #8-32steel,brassplated;neutralscrewnickleplated
Ground Screw #8-32steel,zincplated,green
Tamper Resistant ReliableDelrinshutterassembly