User's Manual

Installing and Activating Devices
The control menu allows devices to be operated in a specific manner. When a device is entered into the
network, information is retrieved from the device and stored in the wireless control system. The amount and
type of information retrieved determines the extent to which the device can be controlled by the controller.
The system may not recognize all controls for some devices. If you try to select a device that is not
controllable in a specific way, a pop-up window will appear with an error message. The pop-up window
can be cancelled using the Back key, or simply wait two seconds for the message to automatically
disappear.
Below are some examples of devices, their generic/specific type, and the resulting functionality with
your system.
Controlling Devices
Device Generic/Specific Type Functionality
Binary Switch
None/Binary Switch, Binary
Switch/Binary Switch, Binary Power
Switch/Binary Switch
On button turns switch ON and off
button turns switch OFF.
Multilevel Switch
None/Multilevel Switch, Multilevel
Power Switch/Multilevel Power Switch
On button turns switch ON and off
button turns switch OFF. ON button
held down brightens switch.OFF button
held down dims switch.
Toggle Switch
Remote Switch
None/Basic, Binary Toggle Switch/
Binary Toggle Binary Toggle Remote
Switch/Binary Toggle
Both on and off buttons toggle switch.
Toggle Switch
Remote Switch
Multilevel Toggle Switch/Multilevel
Toggle Switch Multilevel Toggle Remote
Switch/Multilevel Toggle
Both on and off buttons toggle switch.
Both buttons held down toggle switch.
Remote Switch
None/Basic, Binary Remote
Switch/Binary Switch
On button turns switch ON and off
button turns switch OFF.
Remote Switch
Multilevel Remote Switch/Multilevel
Switch
On button turns switch ON and off
button turns switch OFF. ON button
held down brightens switch. OFF
button held down dims switch.
Entry Control None/Lock, Door Lock/Lock
On button activates lock and off button
deactivates.
Semi Interoperable Ignore/Basic
On button activates and off button
deactivates.
Window Covering
None/Basic, Simple Window Covering
Control/Basic Window Covering
On button opens window covering and
off button closes window covering.
Remote Controller, Static Controller,
Repeater Slave, Binary Sensor,
Multilevel Sensor, and Pulse Meter
No functionality available.
SECTION III
ALL
ON
Devices
All On Activated
Mon 12:00 AM
1. Press the ALL ON button on the controller. All
of the devices that are part of the ALL ON
group will turn on. Each device can be
programmed to be included with the
ALL ON command.
Activating ALL ON
1. Press the ALL OFF button on the controller.
All of the devices that are part of the ALL OFF
group will turn off. Each device can be
programmed to be included with the
ALL OFF command.
Activating ALL OFF
ALL
OFF
Devices
All Off Activated
Mon 12:00 AM
SECTION III
Installing and Activating Devices
1716
DDoo wwee nneeeedd tthhiiss??
Note from Loudwater–I’m not sure you’d want to have this table
shown to a user. It’s very ZWave specific. I think you need to ask
Cooper and Zensys on this.