User's Manual

Installing and Activating DevicesQuick Reference Guide
8
B
Enter the event name
B_
Enter the event name
Bathroom 2
Enter the event name
Bathroom 2
Enter the event name
Bathroom 2
Enter the event name
All OFF
12
34
56
78
9
10
• To find a letter when entering a name,
use the up and down arrows to scroll
through a list containing the alphabet and
a space key.
Creating Custom Names
• To save an entry, press the right arrow once.
The cursor will move one space to the right.
• To enter a number instead of a letter
(handheld controller only), press the
number on the number pad.
• To enter a number instead
of a letter (tabletop
controller only), press one
of the Favorite Scene
buttons. Use the up and
down arrows to scroll
through numbers.
• To erase the previous letter or number,
press the left arrow once.
Several features of the wireless system give the option to create custom names. More detailed instructions
for each of these features is included in this manual. Here are some tips to introduce you to the process:
Device 1_
Device 1
Press the Install Button
on the Device
Added Device 1
Install Device
Control
Install
Associate
Uninstall
Devices
Press the Install Button
on the Device
Install Device
The wireless control system can be programmed to direct up to 232 individual devices (Handheld/Tabletop
is one of the 232 devices). After reviewing this section, you will be able to perform the following basic
functions:
• Installing a Device • Controlling Devices
• Checking Device Status • Controlling the Thermostat
• Renaming a Device • Customizing All Switch
• Configuring a Device • Activating Panic Mode
• Activating Individual Devices • Customizing Panic Group
• Activating ALL ON and ALL OFF
1. Select the “Install” option from the Devices
menu. Press the OK button (Located at the
center of the arrow pad).
2. Press the Install button on the device.
The installation process will last thirty
seconds. If you want to end the installation
process, press the Back button on your
controller during the waiting period.
3. When the installation process has
completed, the controller will assign a name
to the device.
• If the device is a Cooper Wiring product,
the name is read from the device. The device
will automatically be added to the All Switch
and Away groups of the wireless system.
(See pages
XX to learn more about these
features.)
• If the device is not a Cooper Wiring
product, the controller will assign a default
name based on the generic class of the
device. The device cannot be assigned to the
All Switch and Away groups of the system.
Installing a Device
9
SECTION IIISECTION II