User's Manual

5554
Version
Replicate
Network Discovery
Reset
Discovery process
complete
Settings
Network Discovery
Troubleshooting Guide and Maintenance
Operating Network Discovery
1. Select the “Network Discovery” option from
the Settings menu. Press the OK button.
2. The discovery process will last several
seconds. A pop-up window will display a
message when the operation is complete.
Network discovery is a network management function that forces the controller to search for devices and
update the network routing tables contained in the devices and in the handheld. It is rarely used in the day-
to-day operation of the wireless system.
{Do users need this information or is it only used by service
technicians?}
SECTION IX
Troubleshooting Guide and Maintenance
1 Dining Room Dimmer
2 Bathroom Lights
3 Den Lights
4 Stereo Outlet
Devices
Uninstall
Remove
Replace
Child Protection
Whole House
Dining Room
Bathroom 1
Bathroom 2
Location
Devices
1 Dining Room Dimmer
2 Bathroom Lights
3 Den Lights
4 Stereo Outlet
Devices
Bathroom Lights replaced
1. Select the “Replace” option from the Devices
menu. Press the OK button.
Replacing a Failed Device
2. Highlight the location of the device to be
replaced. Press the OK button.
3. Highlight the specific device to be replaced.
Press the OK button.
4. Press the Install button on the new device.
5. The controller will generate new mode
information for the system and complete the
replacement process. A message will confirm
whether or not the device has been replaced.
SECTION IX
Is this popup window correct?
Note from Loudwater–The network discovery is something the
users may never use. Not sure if there will be such a thing as a
service technician. It may be that they will be instructed to use this
over the phone with support.