User's Manual

52
Associate
Uninstall
Remove
Replace
Whole House
Dining Room
Bathroom 1
Bathroom 2
Location
Devices
Devices
1 Receptacle
2 Bathroom Lights
Devices
1 Receptacle
2 Bathroom Lights
Bathroom Lights removed
Troubleshooting Guide and Maintenance
1. Select the “Remove” option from the Devices
menu. Press the OK button.
Removing a Failed Device
2. Highlight the location of the device to be
removed. Press the OK button.
3. Highlight the specific device to be removed.
Press the OK button.
4. The controller will check the system to
confirm that the device contains a failed
noted ID. A message will confirm whether or
not the device has been removed.
SECTION IX
Troubleshooting Guide and Maintenance
Location
Configure
Version
All Switch
Location
Devices
1 Overhead light
2 Receptacle
3 Device 3
Devices
Node ID 2
Application 0.15
Protocol 1.97
Library Rout Slave
Receptacle version
Bathroom 5
Sun room
Exercise room
Theater room
OR
OR
Back
1. Select the “Version” option from the Devices
menu. Press the OK button.
Retrieving Version Information about an Individual Device
2. Highlight the location of the device. Press the
OK button.
3. Highlight the specific device. Press the OK
button.
4. View version information about the device.
5. When finished, press the OK or Back button
to return to the main settings menu.
SECTION IX
53
Is this popup window correct?