User's Manual

Panic
Language
Version
Replicate
Node ID 1
Home ID BEEF0003
Application 1.0.12
Protocol 1.59
Settings
Version
Back
OR
OR
Personalizing System Settings
SECTION VIII
Retrieving Version Information about your System
1. Select the “Version” option from the Settings
menu. Press the OK button.
2. View version information about the wireless
control system.
3. When finished, press the OK or Back button
to return to the main settings menu.
You may encounter some problems while using your wireless control system. Use this section to learn
about the following functions:
• Retrieving Version Information about your System
• Retrieving Version Information about Individual Devices
• Removing a Failed Device
• Replacing a Failed Device
• Operating Network Discovery
Troubleshooting Guide and Maintenance
Remove
Replace
Child Protection
Device Status
Devices
Dining room
Media room
Bathroom
Bedroom
Location
Devices
1 Overhead lights
2 Light 2
Overhead lights Protection
No Protection
Sequence Control
Remote Control
Overhead lights Protection
No Protection
Sequence Control
Remote Control
Device updated
1. Select the “Child Protection” option from the
Devices menu. Press the OK button.
Activating Child Protection
2. Highlight the location of the device for child
protection. Press the OK button.
3. Highlight the specific device for child
protection. Press the OK button.
4. The current level of protection will be marked
with a checkmark. If you want a different
level, use the arrow pad to highlight one of
the three available protection levels.
Press the OK button.
If you want Unprotected, the device will not
be protected.
If you want Sequence control, two or more
devices can be controlled in consecutive
order.
If you want Remote control, the device will
only be controlled by the local controller.
5. To confirm changes, wait for a pop-up
window to display “Device updated.”
SECTION IX
5150