User's Manual

Creating and Controlling Scenes
3. Highlight the specific device that you
would like in the scene and press the
OK button.
4. Highlight one of four setting options for
the device: Not used, On, Off, or a
specific light level. Press the OK button.
TToo sseelleecctt aa ssppeecciiffiicc lliigghhtt lleevveell
, you can
select a percentage from 0% to 100%.
Use the up and down arrows to enter the
number. Press the OK button when
finished. (If a device does not allow a
specific light level, you will receive a
window showing an Error message.)
5. Repeat Steps 3-5 for all devices within the
scene.
6. To save the scene, press the Menu button.
Device On
Receptacle Not Used
Lamp 1 10%
Save
Scary movie Lamp 1
Scary movie Lamp 1
Not used
On
Off
10%
Scene Scary movie
Not used
On
Off
10%
Menu
Scene Scary movie
Device On
Receptacle Not Used
Lamp 1 Off
Save
Creating a Scene (continued)
SECTION IV
Creating and Controlling Scenes
SECTION IV
Activate
Create
Delete
Edit
Enter the scene name
Enter the scene name
Bathroom
Scenes
Scary movie
Creating a Scene
1. Select the “Create” option from the Scenes
menu. Press the OK button.
2. Using the arrow pad, enter a name for the
scene.
To use one of the system’s pre-
programmed scene names, press the up
arrow and scroll through the options until
you find the desired name. Press the OK
button to save.
A scene is a combination of lighting or appliance devices selected by the user that can be controlled as a
group by the wireless system. Now that you’ve installed devices into the system, you can program your
controllers to create and control scenes in your home. After reviewing this section, you will be able to
perform the following basic functions:
• Creating a Scene • Renumbering a Scene
• Activating a Scene • Deleting a Scene
• Creating Favorite Scenes • Editing a Scene
• Renaming a Scene
If you want another name, press the
down arrow once. Scroll through the
alphabet until you find the first letter of the
name. When the letter appears, press the
right arrow and continue the process until
the name is spelled out. Press the OK
button to save.
2322