Instructions / Assembly

*Add Push in Connectors:
Eliminate wire-nuts by using more
efficient push in connectors that can
provide quick space saving solutions; ideal
for pre-fab applications.
If you were to install 300 receptacles at a job site, you
could save significant time and money each step of the
customization process.
Save as much as 4.2 hours
on the job site
For Receptacles, Switches, GFCIs & TVSS devices
Build-To-Spec Devices
Ordering Matrix
X Z T
Arrow Hart 20A 125V NEMA 5-20 white duplex
receptacle, with wire leads and push-in connectors,
without mounting screws, ears, split-circuit tab or
grounding clip.
Remove mounting screws
Base Catalog Number
(including device color)
*See page 3 for applicable leaded or pigtailed product options.
**For use with leaded devices only. Add “PSOL” to back of device catalog number for 6” of #12 AWG solid or “PSTR” for 6” of #12 AWG stranded. Example: 5362V
PSTR + Build to Spec Options). See page 3 for applicable leaded or pigtailed product options.
All devices are bulk packed 50 pieces per carton. Minimum order quantity is 100 pieces. Orders under 500 pieces ship within 5 days with larger quantities typically within
10 days.
G P
Remove ears
Remove split-circuit tab
Remove ground clip
Add push-in connector**
Remove Mounting Ears:
Perfect for pre-fab applications
and job site installations where
devices are being installed before drywall.
Remove Split-Circuit Tab:
Ideal for applications requiring
switch control for one outlet on a
duplex receptacle.
Remove Grounding Clip:
Ideal for applications where other
mounting hardware is being used
and where flush mounting applications
require the elimination of the clip.
Saves 1.2 Hours per 300 devices
Saves 1.2 Hours per 300 devices
Saves 0.6 Hours per 300 devices
Saves 0.6 Hours per 300 devices
Saves 0.6 Hours per 300 devices
Remove Mounting
Screws: Ideal for center
mounting OEM applications or
when using other mounting hardware.
X
T
Z
G
P
5362W
PSOL
Add 6" leads
PSOL = #12 AWG solid
PSTR = #12 AWG stranded
Sample Number:
4