Specifications

71
Analogue Panels
Ultimate2000
The Ultimate 2000 is a high specification analogue fire
alarm control panel, which is available in a 2 loop
configuration. It combines sophisticated functionality yet
simple operation with very aesthetically pleasing design.
The large capacity, ability to support complex cause and effect
programming and wide range of user controllable function
make the panels suitable for a wide range of commercial and
industrial applications.
The Ultimate 2000 panel uses soft addressing to minimise
installation time and remove the potential for errors associated
with manual addressing. All of the Ultimate fire detection system
components have been specifically designed to operate as part
of an integrated system provides an assurance that the panel,
detectors, interfaces and other ancillaries are all fully compatible
with each other and that the full range of system functionality is
supported by each device.
Features
> 2 Loop Panel-Networkable
> Up to 150 addresses per loop
> Easy Programming
> Short Circuit Isolators Incorporated
into each loop device
Technical Specifications
Standards Approved to UL864 9th Edition
Model Ultimate2000
Number of Loops 2
Networkable Yes
Addresses per loop 150
Panel Sounder Circuits 4 Outputs NAC's
Programmable Relays 3
Alarm Relay 1
Trouble (Fault) Relay 1
Output Ports RS485, RS232 & USB
Mains input voltage 110 / 230V ac
System Operating Voltage 24V dc
Battery 2 x 12V 7 Ah or 2 X 12V 12 Ah (dependent)
Cable Entries 4 Top-entry
11 Right side
2 left side
Environmental Rating 0°C to +49°C, 95% RH (non condensing)
Colour Red
Size WxHxD (mm) 370 x 393 x 112
Weight 10kg
Product Codes
Ultimate2000 2 Loop analogue panel
Ultimate2000NC 2 Loop analogue panel C/W network card
APPROVED TO
UL864 9TH EDITION
110616_Cooper fire catalogue_2010:Layout 1 22/2/10 08:54 Page 71