Specifications

64
Repeater Panel/Detector
Bi-Wire detector
Cooper Fire is introducing a new range of Bi-Wire
detectors consisting of a new revolutionary dual patent,
multi-sensor detector which incorporates both Bi-Wire
and Self-check features, as well as having 5 different
modes within a single detector.
Features
> Chamber monitoring and Drift Compensation
Dual LED with 360° viewable design
> 5 modes in 1 detector
> Self check facility
> 360° viewable LED design
> Common mounting base
This new conventional detector can be configured to operate as
either an optical detector, opto/heat multi-sensor or 1 of 3 heat
detector modes (A1R, BS, CS) using the four position switch
located at the back of the detector.
The detector, having self check facilities, has a dual LED
indicator. The red LED is continuous to indicate alarm condition,
the yellow LED is lit continuously to indicate a smoke sensing
chamber fault or that the detector has reached the limit of its
contamination compensating ability. This LED can also be
pulsed from the panel to locate wiring faults thereby saving time
and cost by facilitating the fault finding process.
CDBB300
UBMSBW
CIR301
Product Codes
UBMSBW Multi sensor detector
CDBB300 Base
CIR301 Remote indicator
FXRP2200BW
To complement the Bi-Wire range a repeater panel
is available for connection to the 4 and 8 zone
Bi-Wire panels.
Features
> Repeater matches the style and appearance of main
control panels
> Facility for signalling to repeater panel provided as standard
on 8 zone panel
> Specially configured versions of 2 and 4 zone panels
available for use with a repeater panel
> Displays essential information at other key locations in
a large building/site
- Zone fire and fault conditions
- Test mode in operation
- Zones or alarm lines in disabled mode
> Repeater panel requires only a single pair of wires to
receive signals from main control panel, plus local mains
power supply, reducing cost of installation
FXRP2200BW
110616_Cooper fire catalogue_ver 1:Layout 1 24/2/10 12:18 Page 64