Specifications

30
Typical application schematic
Voice Alarm
Technical Specifications
Audio Outputs
Circuits 2 off 30W RMS
Level 100V RMS (+40 dB(A)V)
Bandwidth 80Hz to 18kHz
Monitoring dc end of line
Fault indication Open, Short, Earth
Inputs
BGM
Sensitivity -6dB(A)V to +2dB(A)V
Remote Pot Value 10K Ω
PAGE
Sensitivity -6dB(A)V to +4dB(A)V
Ptt Type 5V to access
Fire Interface
Inputs 3 off isolated +12V to +33V
(Alert, Evacuate, Reset)
Outputs 1 Relay (open on fault)
Fire Microphone
Audio Sensitivity 0dB(A)V Balanced
Control Inputs Monitored triggers (PTT, MSG1,
MSG2, CNCL) 5V active.
Power Supply
Mains 230Vac ±10%
Battery 24V nominal
Charger Type Constant Voltage
Charge Voltage 27.6V
Charge Current 1.1A
Aux Supply 1A
Quiescent Current 440mA (both Channels active)
60mA (Mains off)
Standards Compliance
EMC EN55103-1, EN55103-2
LVD EN60065
Product Family EN54-16, EN54-4
Physical
Height 220mm
Width 430mm
Depth 120mm
Weight 8.5kg
Material Zintec Painted,
ABS lid
Colour Light Grey/ Dark Grey
Emergency voice
communications
(See section 5)
110616_Cooper fire catalogue_2010:Layout 1 22/2/10 08:53 Page 30