Specifications

17
Interfaces/Ancilliary PCBs
4 to 20mA Interface
> Addressable interface with built-in isolator
> Ideal interface for gas detectors
> Uses one address
> Program levels of sensitivity using dip switch
> 3 volt free outputs for each of the three alarm levels (optional)
> Tracking/enabling facility (in tracking mode CF3000 will
display pre-alarm 1, pre-alarm 2 & alarm). In alarm condition,
CF cause & effect programming is enabled
> Requires external power supply (PSU is opto isolated
from CF3000 loop)
> The supply to the gas detector is taken directly from
the interface
Mimic PCB
> Available as master or slave. Each has 32 outputs
> 96 outputs (1 master + 2 slaves)
> Ideal for mimic panel provision
> Two types available:- LED or relay output
> Each output can be programmed as fire or fault
> Each output can be operated by address, zone or
panel activation
LED Repeater PCB
> Can be loop connected or network connected
> Each LED can be programmed to operate by zone or
by address for fire or fault indication using PC repeater
download software
> Up to 5 different zones can be programmed per LED
> General fire, fault, local power fault & system fault
LED provision
> Test lamp button
Loop splitter unit
> Unit is loop connected
> Splits each connected loop into 4 smaller loops
(max 50 devices per loop)
Master and slave LED output PCB
Master and slave relay output PCB
4 to 20mA Interface 4 to 20mA Interface
with relay outputs
Loop splitter PCB
96 zone LED repeater PCB
Product Codes
CGI420 4 - 20mA interface
CGI420R 4 - 20mA interface with relay output
ZPCB2252-MMR Master relay output PCB
ZPCB2252-MSR Slave relay output PCB
ZPCB2252-MML LED master output PCB
ZPCB2252-MSL LED slave output PCB
ZPCB2232-P 96 zone LED repeater PCB
ZPCB2222 Loop splitter unit
110616_Cooper fire catalogue_2010:Layout 1 22/2/10 08:52 Page 17