Specifications

16
Fan controller interface
FC18 FC6
Fan controller interfaces
FC18 and FC6 Interface is designed to work with the
Cooper CF range of analogue fire alarm control panels,
providing the capability to control and display the status
of AHU fans.
FC18 and FC6 Interface is connected to a Cooper analogue
addressable fire alarm control panel by means of the comms
loop, utilizing only one address whilst providing the ability to
monitor and control up to six AHU Fans.
Each FC6 and FC18 Interface incorporates its own CPU
specifically configured to control the relevant input and output
logic making programming quick and easy via the Cooper
‘CAPPER’ software or site installer.
Using the CAPPER software or site installer, each individual
Fan Control channel on the FC6 is programmed to an output
and feedback input field device to control and monitor the
status of an AHU fan.
Features
> Convenient loop mounting
> Comprehensive LED display
> Surface/rack mounting options
> Key operated auto/manual operation
> Comprehensive software cause and effect
Technical Specifications
Minimum Nominal Maximum
Quiescent Current - 310µA-
Environmental Operating Temp -100ºC - +600ºC
Humidity (non-condensing) --95%rh
External 24V Supply 18V 24V 28V
External Current --150mA
Compatibility Cooper Analogue Fire Systems
Product Codes
FC6 6 way fan controller - surface mount
FC18 18 way fan controller - 19” rack mount
110616_Cooper fire catalogue_2010:Layout 1 22/2/10 08:52 Page 16