Specifications

83
Cleco Torque Verifi ers
The Series TVP-100 torque verifi er provides low-cost cer-
tainty during assembly for pneumatic, rotating and pulsing
nutrunners.
The new Cleco torque verifi ers TVP-100 improve the assem-
bly process as user errors due to releasing the trigger too
early, stripping the screw thread or re-hits are indicated.
The Series TVP-100 is designed for usage with pneumatic
Cleco shut-off nutrunners and Cleco pulse shut-off nutrun-
ners with torque verifi er kit.
The Series TVP-100 provides optical and acoustic feedback
both for individual fastening parameters and for fastening
groups and in this way ensures that each element is correctly
and completely fastened.
Building on the TME controller technology from Cleco, the
user interface on the series TVP-100 permits straightforward
setup and operation of the tool.
The Series TVP-100 measures the fastening sequence on
the pneumatic tool connected.
Deviations from a normal fastening sequence due to re-hits,
stripping threads, prematurely releasing the trigger or a num-
ber of other variables result in an acoustic and optical NOK
signal from the verifi er that notifi es the operator of the error.
While the measuring and control electronics TME111 check
the tool and therefore the fastening process, the Series TVP-
100 represents a cost-effective option for checking the shut-
off process.
Easy to read indications
(cycle accept, batch accept, reject)
RS-232
serial connection
12-PIN I/O
connection
Pressure
transducer
connection
User-friendly
user interface
Power
connection