Specifications

81
Cleco WL & WP Series Impact Wrench Specifi cations
Model
Number
Bolt Size
Square
Output Drive
Torque
Range
Impacts
per
Minute
Free
Speed
Length Weight
Side to
Centre
Air Consumption
Size
Torque
Range
Min.
Hose Size
Air Cons.
m³ / min.
mm Inch Nm rpm mm kg mm
Inline - lever start
WL-200-3 M10 3/8 20 - 68 3200 3000 216 1.4 25 1/4" 1/4" 0.51
WL-200-4 M10 1/2 20 - 81 3200 3000 216 1.5 25 1/4" 1/4" 0.51
Pistol grip - trigger control
WP-255-3P M10 3/8 80 - 100 1150 9500 145 1.2 25 1/4" 1/4" 0.85
WP-455-4R M20 1/2 50 - 502 1400 6500 176 2.4 --- 1/4" 1/4" 1.13
WP-455-4P** M20 1/2 50 - 502 1400 6500 176 2.4 --- 1/4" 1/4" 1.13
WP-2050-6 M20 3/4 170 - 800 1000 6000 162 3.5 42 3/8" 3/8" 1.27
WP-2060B-6 M24 3/4 350 - 950 1000 4000 197 5.4 46 3/8" 3/8" 1.70
WP-2060B-8 M24 1 350 - 1200 1000 4000 197 5.5 46 3/8" 3/8" 1.70
WP-2110B-8 M30 1 1000 - 2250 880 4600 241 9.4 56 1/2" 3/8" 2.83
Pistol grip - trigger control - with higher reverse power***
WP-2049-6 M20 3/4 170 - 750 1000 6200 162 3.5 42 3/8" 3/8" 1.27
WP-2059-6 M24 3/4 350 - 950 1000 4000 197 5.4 46 3/8" 3/8" 1.70
WP-2059-8 M24 1 350 - 1,100 1000 4000 197 5.5 46 3/8" 3/8" 1.70
WP-2109B-8 M30 1 1000 - 2250 880 4300 241 9.4 56 1/2" 3/8" 2.83
General information:
Tool performance data
measured at 6.2 bar inlet air
pressure at the air inlet tube.
Standard equipment:
Operating manual and
maintenance instructions
Optional equipment:
86909 Locking pin for WL-200
Additional accessories:
See catalogue SP-1000
**Square drive with sprung pin
***With increased breakaway torque in reverse
2049 Series: 750 ft.-lbs. (1000 Nm)
2059 Series: 1200 ft.-lbs. (1600 Nm)
2109 Series: 2500 ft.-lbs. (3400 Nm)
Model Number
Suitable for
Bolt Size
Square
Output Drive
Torque
Range
Impacts
per
Minute
Free
Speed
Length Weight
Side to
Centre
Air Consumption
Inside Trigger
Torque
Range
Min.
Hose Size
m³/min.
mm Inch Nm rpm mm kg mm
Trigger control - spade handle
WT-2110-8 M30 1 1000 - 2250 880 4600 327 9.5 56 1/2" 1/2" 2.83
WT-2120-12 M36 1 1/2 1600 - 4000 850 3300 362 12.5 59 1/2" 5/8" 2.97
Trigger control - spade handle - with higher reverse power*
WT-2109-8 M30 1 1000 - 2,250 880 4300 327 9.5 56 1/2" 1/2" 2.83
WT-2119-12 M36 1 1/2 1600 - 3500 820 3300 362 13.1 59 1/2" 5/8" 2.97
General information:
Tool performance data
measured at 6.2 bar inlet air
pressure at the air inlet tube.
Standard equipment:
Operating manual and
maintenance instructions
Optional equipment:
Yoke for second handle
Second handle
Additional accessories:
See catalogue SP-1000
2109 Series: 2500 ft.-lbs. (3400 Nm)
2119 Series: 3500 ft.-lbs. (4700 Nm)
*With increased breakaway torque in reverse