Specifications

8
Airetool Accessories
Cleco
®
Drills Series 15DP
Can be used with Airetool tube end
facers and push-type tube cutters.
Tube End Facers
Cleco
®
Drills Series 135DPV
Variable torque controlled drill. One
tool for a large number of applica-
tions. Can be used with Airetool
tube end facers and push-type
tube cutters.
Model Number
Speed
(rpm)
Chuck Capacity Weight
mm kg
15DP-1.6B 160 13 0.27
15DP-4B 400 13 2.5
15DP-8B 800 13 2.5
15DP-14B 1400 10 2.0
Model Number
Speed
(rpm)
Chuck
Capacity
Weight
No-Load Governed mm kg
135-DPV-7B-43 600 150 - 550 10 1.6
135-DPV-
14B-51
1250
400 -
1200
8 1.5
135-DPV-
28B-51
2600
700 -
2400
8 1.4
Tube Outside
Diameter
Tool Number Gauge
Spare Bits
mm
Non-Ferrous or
Carbon Steel
Stainless
9.5
TEF-375
(5519632)
16 - 20
TEF-376
(2987908)
TEF-376-SS
(2991788)
12.7
TEF-500
(5332415)
16 - 20
TEF-506
(2662531)
TEF-506-SS
(2983169)
15.8
TEF-625
(5332425)
14 - 18
TEF-626
(2662558)
TEF-626-SS
(2983170)
19.0
TEF-750
(5332450)
10 - 18
TEF-756
(2662585)
TEF-756-SS
(2983162)
22.2
TEF-875
(5332460)
14 - 18
TEF-876
(2662603)
TEF-876-SS
(2983163)
25.4
TEF-1000
(5332475)
10 - 18
TEF-1006
(2662633)
TEF-1006-
SS
(2983164)
Part Number
Stock
Number
Radius Shank Type
12-RM-9-5/32-
R-01
2968677 5/32" Type 01
12-RM-9-1/4-
R-01
2968676 1/4"
(0.680" round
x 2 3/8" long)
Belling and Flaring Tool
Belling tool: Pilot end fi ts in tube inside diameter with type 01
retainer.
State the tube outside diameter, gauge and radius in tube
sheets.
A set of gauges is supplied with the tube end facer tools given above. Other sizes are also
available. Contact your distributor for further details.
Beading Tool*
Extensions with Quick-Change Chuck
Use different extension lengths for diffi cult to access tubes.
The quick-change chuck enables the operator to change the
expander quickly. State the size of the square drive and the
extension length.
FT-515 – 60° Flaring Tool
Developed for fl aring tubes with outside diameter 1/2" –
1-1/2" (12.7 – 38.1 mm). Available with 01 or 06 round
shank, can be used with standard chisel hammers.
Quick-Change
Extension Complete
Stock
Number
Square Drive Size
Male/Female
Overall Length
mm
•QC-375-6 5501200 3/8" (9.5 mm) 152
QC-375-8 5501600 3/8" (9.5 mm) 203
QC-375-12 5502000 3/8" (9.5 mm) 305
•QC-375-18 5503000 3/8" (9.5 mm) 457
QC-375-24 5504000 3/8" (9.5 mm) 610
QC-375-30 5504500 3/8" (9.5 mm) 762
QC-375-36 5505000 3/8" (9.5 mm) 915
QC-500-12 5507000 1/2" (12.7 mm) 305
QC-500-18 5508000 1/2" (12.7 mm) 457
•QC-500-24 5509000 1/2" (12.7 mm) 610
QC-500-30 5510000 1/2" (12.7 mm) 762
•QC-500-36 5511000 1/2" (12.7 mm) 915
Sleeve Type Extensions
Can be used where tubes are near to the shell of the
condenser. The small diameter at the end permits access to
these tubes.
Quick-Change
Extension Complete
Stock
Number
Square Drive Size
Male/Female
Overall Length
mm
3/8 x 12 5515758 3/8" (9.5 mm) 305
•3/8 x 18 5513774 3/8" (9.5 mm) 457
•3/8 x 24 5515759 3/8" (9.5 mm) 610
•3/8 x 36 5515761 3/8" (9.5 mm) 915
•1/2 x 12 5515733 1/2" (12.7 mm) 305
1/2 x 18 5513775 1/2" (12.7 mm) 457
1/2 x 24 5515734 1/2" (12.7 mm) 610
•3/4 x 12 5515735 3/4" (19.0 mm) 305
•3/4 x 18 5515736 3/4" (19.0 mm) 457
•3/4 x 24 5515737 3/4" (19.0 mm) 610
• Only available on quotation.