Specifications

MP2295
MP2294
55
Series MP2290
■ Two hammer anvil for reduced vibration
■ Higher power-weight ratio
■ Integrated 4-stage power regulator
■ 100% ball-bearing motor design
■ Full power forward and reverse
■ Smooth, effi cient impact mechanism
■ Reversible
Model Number
Output Drive Torque Range Speed
Impacts per
Minute
Bolt Size Weight Air Consumption
in. Nm rpm mm kg m³/min.
MP2294 1/2 (ring locking) 50 - 502 6500 1400 M 20 2.4 1.13
MP2295 1/2 (pin locking) 50 - 502 6500 1400 M 20 2.4 1.13
GENERAL:
Air inlet tube 1/4" NPT
Use a hose with 1/4" (6.4 mm) inside diameter.
Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube.
STANDARD EQUIPMENT:
Instruction manual and parts list.
OPTIONAL:
60538 Master Guard oil (approx. 0.1 l)
60539 Master Guard oil (approx. 1.0 l)
22034 Hose line lubricator
63593 8" hose
Master Power Impact Wrenches